FEATURES
• The workbench includes a power console unit with built-in customized basic electrical peripherals (such as AC & DC power supplies, safety module/switches,
power sockets, connectors & etc.) that enable experiment to be carried out in an user friendly environment.
• A convenient system whereby all the power supplies from its console panel can be accessed easily via standard connectors.
• Each module on the console comprises of clearly labeled diagrams with built-in accessible connectors & wiring points.
• For protection wise, the system incorporates uncompromised safety features to protect the unit and also the operator against any unwanted occurrence.
SPECIFICATION
•
BENCH FRAME
• Bench Frame dimension: 1720mm (W) x 820mm (D) x 740mm (H) approx.
• Construction: approx. 38mm x 38mm hollow mild steel coated with epoxy powder coated finishing
• Mounting: 4 steel leg sections attached to 1 common foot section
• All 4 frame legs supported by plastic height adjustable legs caps
• Color: Light Gray
•
BENCH TOP
• Dimension: 1800mm (W) x 900mm (D)
• Construction: Built from high density 25mm thickness highly compressed mulltilayer/multigrain solid chipboard
• Protection: Scratch- resistant & non abrasive melamine resin lamination on board
• Conceal ABS impact resistance protection for edges
• Color: Light Gray
•
BENCH TOP CONSOLE UNIT
• Dimension: 1800mm(L) x 300mm(D) x 300mm(H) approx.
• Construction: Built from high compression/ density fine grain multi-layer chipboard(16mm thickness) .
• Protection: Scratch- resistant & non abrasive melamine resin lamination on board.
• Conceal ABS impact resistance protection for edges
• Color: Light Gray
•
STORAGE DRAWER (OPTIONAL)
• No. of Drawers(to specify): 4 units (only 1 unit is lockable) OR 3 units (all units are central lockable) , all drawer with handles
• Construction: Built from high compression/ density fine grain multi-layer chipboard.
• Scratch- resistant & non abrasive melamine resin lamination on board
• Mobile type (moveable) OR can be fixed to the frame corner (to be specified when ordering)
• Color: Light Gray
•
LABORATORY STOLL TYPE (OPTIONAL)
• Robust construction: Seat made from heavy duty plywood, metal frame base
• 2 Units
•
FABRIC COVER MID BACK REST CHAIR (OPTIONAL)
• Fabric cover cushion, with mid back rest chair
• Adjustable height lever, castor wheel base
• 2 Units
MODULE SPECIFICATION
•
INPUT PROTECTION & CONTROL
• Residual Current Circuit Breaker protection (IΔn 30mA, In 40A, Un 415V)
• Incoming mains On/Off switch
• Miniature Circuit Breakers for supply outlet protection
• Safety ON/OFF CAM Key Switch
• On/Off Push Buttons
• Indicator for three phase mains supply: 3 units(Red, Yellow, Blue each)
• Emergency Push button : 1 unit
• Includes approx. 3m of mains AC cable, terminated with one 5 pin CEE three phase plug unit for input supply
• Input : Three Phase 240/415V(50Hz) 5 Pin CEE AC Socket
•
ANALOG METER INDICATOR
• Analog AC Voltmeter (AC500V) x1
• Analog AC (AC30A) x1
• Voltmeter Selector Switch x 1
• AMMeter Selector Switch x 1
• Analog AC Ammeter (AC30A) x1
•
BS SOCKET OUTPUT
• Single Phase AC Output :
▪ 4 Units BS 3-Pin AC Outlet socket (Rating: 240VAC/13A)
• With miniature circuit protection
•
AC POWER SUPPLY
• L1, L2, L3, N and PE output via 5 x 4mm safety connectors
• One 5-pin CEE (16A) three phase AC panel socket
• On/Off selector switch for 3 phase outputs
•
EXPERIMENTAL TRANSFORMER
• Adjustable Output Via Selector Switch :
▪ 0 ~ 450VAC / 3A (Max)
▪ 0 ~ 240VAC / 3A (Max)
▪ 0 ~ 220VDC / 3A (Max)
▪ Fixed 220VDC Output 3A (Max)
• ON/OFF Switch
• Pilot Lamp Indicator for L1,L2,L3
• Digital Indicator for AC & DC Voltage
• Output via 4mm Safety Connector
•
DIGITAL MEASUREMENT UNIT
• AC Voltmeter (78mm x 42mm, 240VAC) (0 ~AC500V) x 1
• DC Ammeter (78mm x 42mm, 240VAC) (0 ~DC10A) x 1
• DC Voltmeter (78mm x 42mm, 240VAC) (0 ~DC500V) x 1
• AC Ammeter(78mm x 42mm, 240VAC) (0 ~AC10A) x 1
MANUAL & ACCESSORIES
• Operation / User Manual x 1
• Connecting Lead x 1 Set
