ELECTRONIC LAB TEST WORKBENCH
MODEL: ELB-300D
The ELB-300D Electronic Lab Test Workbench is a robust, reliable & ergonomic
single phase test bench system that is most suitable to be used in an laboratory or
workshop for powering up electronics / electrical devices or system in
conducting hands-on practical experiments or testing purposes. The sturdy frame &
working table are manufactured using high quality materials to ensure that it
withstand harsh working condition. Suitable for college and universities
laboratory and also for projects or R&D usage.
DESCRIPTIONS
FEATURES
The workbench includes a power console unit with built-in customized basic
electrical peripherals (such as AC & DC power supplies, safety module/switches,
power sockets, connectors & etc.) that enable experiment to be carried out in an
user friendly environment. A convenient system whereby all the power supplies
from its console panel can be accessed easily via standard connectors. Each module
on the console comprises of clearly labeled diagrams with built-in accessible
connectors & wiring points. For protection wise, the system incorporates
uncompromised safety features to protect the unit and also the operator against any
unwanted occurrence.
A. BENCH FRAME
- Bench Frame dimension: 1720mm (W) x 820mm (D) x 740mm (H) approx.
- Construction: approx. 38mm x 38mm hollow mild steel coated with epoxy powder
coated finishing
- Mounting: 4 steel leg sections attached to 1 common foot section
- All 4 frame legs supported by plastic height adjustable legs caps
- Color: Light Gray
B. BENCH TOP
- Dimension: 1800mm (W) x 900mm (D)
- Construction: Built from high density 25mm thickness highly compressed
mulltilayer/multigrain solid chipboard
- Protection: Scratch- resistant & non abrasive melamine resin lamination on board
- Conceal ABS impact resistance protection for edges
- Color: Light Gray
C. BENCH TOP CONSOLE UNIT
- Dimension: 1800mm(L) x 300mm(D) x 300mm(H) approx.
- Construction: Built from high compression/density fine grain multi-layer chipboard
(16mm thickness) .
- Protection: Scratch- resistant & non abrasive melamine resin lamination on board.
- Conceal ABS impact resistance protection for edges
- Color: Light Gray
D. STORAGE DRAWERS (Optional)
- No. of Drawers(to specify): 4 units (only 1 unit is lockable) OR 3 units (all units are
central lockable) , all drawer with handles
- Construction: Built from high compression/density fine grain multi-layer chipboard.
- Scratch- resistant & non abrasive melamine resin lamination on board
- Mobile type (moveable) OR can be fixed to the frame corner (to be specified when
ordering)
- Color: Light Gray
SPECIFICATION
i. INPUT PROTECTION & CONTROL:
- Residual Current Circuit Breaker protection(IΔn 30mA, In 40A, Un 240V)
- Incoming mains On/Off switch
- Miniature Circuit Breakers for supply outlet protection
- Safety ON/OFF CAM Key Switch
- On/Off Push Buttons
- Indicator for single phase mains supply: 1 unit(Red)
- Emergency Push button : 1 unit
- Analog AC Voltmeter x1
- Analog AC Ammeter x1
- Includes approx. 3m of mains AC cable, terminated with one 3 pin CEE single phase
plug unit for input supply
ii. MAINS AC SUPPLY OUTPUT:
- Single Phase AC Output: 4 units BS 3-Pin AC Outlet Socket (Rating:
240VAC/13A) , with miniature circuit breaker protection. L, N and PE
output via 3 x 4mm safety connectors
iii. DC POWER SUPPLY UNIT (Regulated/Stabilized) – 1 set:
- On/Off power switch
- DC Power Supply Output: 1 x 0 ~ 30VDC / 1 x 0 ~ 3A
- Digital DC Output Display: Voltage and Current Ampere
- Protection: Overload & Short-Circuit
- Output Connection: Via 4mm Safety Binding Post
iv. EXPERIMENTAL TRANSFORMER - 1 set:
- Outputs: 0 ~ 240VAC/3A
- On/Off Switch
- Fused protection
- Connectors: L/N/PE accessible via 4mm Safety Binding Posts
v. DIGITAL MEASUREMENT METER:
- AC Voltmeter(0 ~500V) x 1 (78mm x 42mm, 240VAC)
- DC Ammeter(0 ~10A) x 1 (78mm x 42mm, 240VAC)
- DC Voltmeter(0 ~500V) x 1 (78mm x 42mm, 240VAC)
- AC Ammeter(0 ~10A) x 1 (78mm x 42mm, 240VAC)
vi. INPUT REQUIREMENTS:
- Single phase 240V/50Hz 3 pin CEE AC socket (to be pre-installed within user’s
laboratory building) *1
POWER CONSOLE FEATURES AND DESCRIPTION
TYPE A: Laboratory stool type ( 2 sets)
- Robust construction: Seat made from heavy duty plywood, metal frame base OR
TYPE B: Fabric cover cushion, with mid back rest chair (2 sets)
- Adjustable height lever, castor wheel base
CHAIR (Optional)
User/Operational Manual x 1
Safety Connecting Leads x 8
ACCESSORIES