FEATURES
• Sensor data collection should be implemented around open hardware platform, making it easy for anyone to experience IoT service
• Portable devices able to implemented using single board computer and embedded microcontroller for IoT application
• Color Monitor, Keyboard, Mouse provided to work with main single board computer board.
• The training system come with minimum 8 type of sensors such as Gas Sensor, Water Level Sensor, IR Sensor, PIR Sensor, 3X-Gyro Sensor,
Temperature/Humidity Sensor, Flame Sensor, and Touch sensor
• Data acquisition from various sensor modules are controlled by microcontroller along with its firmware. Input data can be manipulat-ed for I/O control exercise
• Output : LEDs, Buzzer, Fan simulation (for indication, alarm and cooling)
• In this training kit, the sensor collection data will be store in a defined web server
• The system comes with WIFI router and related module for commu-nication, which is an early stage of IoT services
• It provide unit module practice function using firmware to acquire sensor information and output control exercises
• IoT system uses private local service. Conventional cloud service not required so can save on the operational and running cost
• Training kit will come in a hard casing for easy storage / transporta-tion
IoT INTERFACE FEATURES
• Able to access data from web server (via URL)
• Accessible via any Android base smart phone (Smart phone is optional-sold separately)
• This development system using user’s own Smart Phone for browsing access for status viewing of I/O devices.
STUDY TOPIC COVERAGE
• Understand the basic of Internet of Things(IOT)
• Implementaon and applicaon of sensors
• Data capture from sensors
• Wireless connecvity of data uploading and I/O status viewing
• Control of output devices
• Using the web browser interface
• To enable user to develop web browser based basic interface(GUI) using free development tools
• Sample of web browser interface and program provided for IoT development
• Understand the basic ESP32 Kit
• Understand the basic Arduino Kit
• Understand the basic Raspberry Pi Kit
EMBEDDED MICROCOMPUTER
• Processor: Broadcom BCM2837B0, Cortex-A53, 64-bit SoC @ 1.4GHz
• Memory: 1GB LPDDR2 SDRAM
• Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN,
Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps), 4 × USB 2.0 ports
• Access: Extended 40-pin GPIO header
• Video & sound: 1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port
• Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics
• SD card support: Micro SD format for loading operating system and data storage
• Input power: 5V/2.5A DC via micro USB connector, 5V DC via GPIO header, Power over Ethernet (PoE)–enabled
(requires separate PoE HAT)
EMBEDDED MICROCONTROLLER
• Microcontroller: ATmega328P
• Operating Voltage : 5V
• Input Voltage (recommended): 7-12V
• Input Voltage (limit): 6-20V
• Digital I/O Pins: 14 (of which 6 provide PWM output) ; LED BUILT-IN: 13
• PWM Digital I/O Pins: 6 ; Analog Input Pins: 6
• DC Current per I/O Pin: 20 mA
• DC Current for 3.3V Pin: 50 mA
• Flash Memory: 32 KB of which 0.5 KB used by bootloader
• SRAM: 2 KB; EEPROM: (1 KB); Clock Speed: 16 MHz
WIRELESS MODULE
• Chipset : ESP32-WROOM-32
• Wi-Fi Protocols : 802.11 b/g/n
• Mouting Pin for Microcontroller Module (EMC-01)
• Bluetooth Protocols :
▪ V4.2 BR/EDR & BLE specification
• Radio : NZIF receiver with -97dBm sensitivity
• Class-1, class-2 and class-3 transmitter AFH
• Intergrated crystal : 40MHz crystal
• Connector to application
APPLICATION MODULE
•
Buzzer Module - BZM-01
o
Working Supply 5VDC
o
Connector to application Module
•
DC Fan Module - DFM-01
o
DC Fan : 30mm x 30mm
o
Working Supply : 5V
o
Connector to application Module
•
Output LED Module - OLM-01
o
Working Supply : 5V
o
Connector to application Module
•
Gas Module - GAS-01
o
Working Supply : 5V
o
Sensitivity to harmful gases in wide range
o
Connector to application Module
•
Temp & Humi Module - TMP-H-01
o
Sensing Range - 0-60 degree celsius, 10-90% RH approx.
o
Working Supply : 5V
o
Connector to application Module
•
Water Level Module - WLM-01
o
Working Supply : 5V
o
Connector to application Module
•
IR Module - IRM-01
o
Working Supply : 5V
o
Connector to application Module
•
PIR Module - PRM-01
o
Working Supply : 5V
o
Connector to application Module
•
3X-GYRO Module - GRM-01
o
Working Supply : 5V
o
Connector to application Module
•
Flame Module - WRM-01
o
Working Supply : 5V
o
Connector to application Module
•
Touch Sensor Module
o
Working Supply : 5V
o
Touch on PCB
o
Connector to application Module
•
Wireless Router - Router-01
o
Wireless standards: IEEE 802.11 n/g/b; 2.4GHz/ 5GHz
•
Monitor Display - MONITOR-01
o
10” Color Monitor
o
HDMI Port, VGA Port
o
12VDC
•
Monitor Display - MONITOR-01
o
USB Keyboard x 1
o
USB Mouse x 1
IoT MONITORING SOFTWARE - IoT-MM-01
•
ABL Ver 1.1
•
Support Mobile, Laptop and Tablet devices
MANUAL & ACCESSORIES
• USB download cable
• Ethernet cable
• User Manual & Experiment Lab Manual
• Power Supply Unit
• 32GB Micro SD Card
• Software/Development Tool Installer
• Carrying/Storage Case
• Wireless Wifi Router
